webSCADA Modbus (Configurable Modbus - Web Gateway)

The NetBiter® webSCADA Modbus is a configurable web interface to Modbus RTU devices, for easy monitoring and control. Configuration is done by a web-based user interface in the product.

Halmstad, Sweden, October 13 - - IntelliCom, is proud to announce a new configurable Serial Ethernet product in the NetBiter® series.


The new product, NetBiter® webSCADA Modbus acts as a web interface to one or more Modbus RTU devices. The Gateway holds an embedded web server with web pages inside. By connecting serial Modbus RTU devices to the Gateway it is possible to configure what data (Modbus registers) to be monitored and controlled through the onboard web pages. To get a better view of the application the user can upload graphical images of the installation. The Graphical User Interface is very straightforward and configuration of Modbus registers is easy.

The Gateway also acts a pure transparent connection between serial Modbus RTU devices to the standard Ethernet protocol Modbus TCP, supported by all major SCADA systems and PLC's.


The NetBiter® webSCADA Modbus has the following features:
Ethernet port (10/100 Mbit)
Serial port RS232 / RS485 - Modbus RTU
Configurable web interface
Supports transparent Modbus RTU - Modbus TCP
Up to 32 Modbus RTU Slaves are supported
Very simple configuration (Node address, IP -address etc)
9 -32 V AC/DC
DIN -rail mounting


About IntelliCom
IntelliCom Innovation AB (www.intellicom.se) offers products, services and solutions in the area of Communication technology and Ethernet solutions. We have over 30 Gateways and interfaces for all major networks (Ethernet, LonWorks, Modbus, GSM, Profibus etc.) Our customers are represented all over the world.

Press contact
Henrik Ebeklint
Managing director
+46(0)35 -17 29 92

Featured Product

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

RETRO-M is designed to replace existing Home Intercom Systems and operate on existing 3 and 4 wire systems. BLUETOOTH you music by adding the BT-RECEIVER. No need to remove existing master wall housing, trim plates available to cover those large holes. The RETRO-M intercom unit has a built-in AM/FM radio. Plug in mp3 players such as iPod, iPhone, Zune or any other hand held player into the master and share your music with the entire family. Choose between two music sources; listen to the radio in one room and the mp3 in another room.