Integra Debuts Flexible DTR -4.5 A/V Receiver to Custom Installation Professionals at CEDIA

A/V receiver that not only handles every major home theater sound format currently in use, it also incorporates the industry standard A-BUS™ distributed audio technology.

INDIANAPOLIS, IN (09/07/04) - Integra reaffirmed its commitment to custom installation and distributed audio professionals at the CEDIA Expo today with the introduction of the affordable DTR -4.5 home theater receiver. It is a 5 x 85 -Watt A/V receiver that not only handles every major home theater sound format currently in use, it also incorporates the industry standard A -BUS™ distributed audio technology. Other features include upconversion of composite to s -video, and Integra's Powered Zone 2 capability.

The DTR -4.5 is an exceptional home theater receiver, with onboard processing for Dolby Digital and ProLogic II, DTS, DTS Neo:6, and DTS 96/24. The high quality 192 kHz/24 -bit DAC found on each channel is combined with Integra's VLSC (Vector Linear Shaping Circuitry) to smooth the analog output, generating cleaner and more detailed audio reproduction. For analog sources, Integra's Direct audio mode allows all digital processing to be completely bypassed to preserve the purity of analog audio signals.

Like all Integra products, the DTR -4.5 was designed with the demanding needs of custom installers in mind. It includes a rear panel RS -232 port, three programmable 12 -volt trigger outputs, and IR input and output jacks for seamless integration with nearly any home theater and whole -home control system. There is also a wide array of multizone capabilities, including two -source multizone capability using Zone 2 line -out jacks with external amplification, or Powered Zone 2; both of which feature bass and treble controls, allowing users to separately adjust the audio in the second room.

As the centerpiece of a powerful home theater system, the DTR -4.5 features a broad suite of connectivity options and features. Three HDTV -capable 50 MHz component video inputs and a digital comb filter for composite to s -video conversion are included to maintain optimum video signal integrity. There are a total of four assignable digital inputs as well as a 5.1 -channel input for DVD -Audio and SACD.

The Integra DTR -4.5 will be available in September at a suggested retail price of $500.

Integra designs and manufactures premium Home Theater receivers, processors, amplifiers, and DVD players that are specifically designed to meet the needs of custom audio/video systems installers. Systems integration and convergence technology protocols include RS -232, A -BUS, IR and on -board Ethernet for network connectivity and TCP/IP control. Integra has access to vast technical resources, and bears a proud heritage of over 50 years of audio engineering excellence. For more information about Integra and its many fine products, visit or call 800 225 -1946.

Featured Product

GreenPeak’s GP565 – ZigBee for smart Remote Controls

GreenPeak's GP565 - ZigBee for smart Remote Controls

The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. • 120k or 248k Flash (8k or 16k RAM) memory • 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. • Reduced current consumption and improved receiver sensitivity and output power • Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection