NetStreams® MediaLinX™ Integrates Virtually Any Source Into the DigiLinX™ Distribution System

Analog-to-Digital Converter & Controller Preserves All Sound Quality of Legacy Audio Sources for Distribution Via Digital Network

Austin, TX - September 10, 2004 - NetStreams, the leader in IP -based Networked Audio/Video distribution, introduces the MediaLinX (MLA100) IP -based media converter & controller. It converts in real -time analog or digital audio signals from a legacy source, such as a CD player, tuner, cassette player, etc., into TCP/IP packet -switched, uncompressed, WAV audio streams that can than be distributed over a home entertainment network.


"MediaLinX allows for nearly any audio source to be integrated and controlled as part of the DigiLinX System," said Herman Cardenas, founder and chief executive officer of NetStreams. "MediaLinX converts sound from legacy analog and digital sources into digital audio streams and preserves all sound quality for distribution throughout a digital home entertainment network. With upgradeable firmware, simple installation, and reliable performance, MediaLinX gives both audio system installers and users a superior home entertainment experience."

MediaLinX uses a 24 -bit / 96kHz Burr -Brown® analog -to -digital converter to deliver the best audio fidelity of legacy audio sources. Once converted, analog & digital sources and their transport controls are distributed on the network. NetStreams' Audio Input Compensation Technology allows custom installers to adjust the level of the legacy audio source to ensure consistent volume levels between it and other digital audio sources on the digital home entertainment network. RCA and S/PDIF inputs and outputs provide connection flexibility and
also allow for the straight pass -through of audio signals to a receiver or preamp for local room
listening.

MediaLinX also features a power sensor input and output for power sensing and reporting the power status of audio sources, a potentiometer for easy adjustment of the power sensor's input level, an IR output for easy source control, and a Phoenix connector for source power
management. MediaLinX's power sensing can be accomplished by simply connecting an RCA cable to the source's video output or by using an available LED power sensor (NSPS301 -LS).

MediaLinX, like all NetStreams DigiLinX products, is very easy to install. Learning IR codes is efficient and quick. - - an integrated IR receiver and the NetStreams DigiLinX Dealer Set -Up Software eliminate the need for a separate box for programming. MediaLinX can be mounted on the inside of a rack, rear panel of a legacy source, or up to two can be mounted on the rear of a 19" rack using
the available DigiLinX Universal Rack Mount Plate NS -RP24.

NetStreams DigiLinX family of IP -based products offers very high quality and high performance audio distribution and control with capabilities never seen before, and a rich user experience only available in high cost systems today. This innovative product line, using NetStreams' patent pending technology, is the first IP -based multi -room audio system in the custom market; 'IP -based' meaning a system that is not only controlled over IP, but also distributes its audio and video over packetswitched
streams. DigiLinX delivers on the promise of convergence, effectively marrying networking technologies with hi -fidelity audio and later video, marking the introduction of 'Networked Digital
Entertainment'.

MediaLinX Features:

• Real -time conversion of 1 stereo analog audio source to TCP/IP uncompressed audio
streams
• Burr -Brown® 24 -bit / 96kHz Analog -to -Digital Converters
• High -capacity floating -point digital signal processor (DSP), RCA and S/PDIF inputs and
outputs for connection flexibility and pass -through
• Plug & Play
• Composite Video sensor for video sensing of audio/video sources for audio playback
• Integrated IR receiver
• Future -upgradeable firmware

MediaLinX Specifications:

• Audio Input Connectors: 1 Gold -plated RCA jack
1 Coaxial Digital (S/PDIF)
• Audio Output Connectors: 1 Gold -plated RCA jack
1 Coaxial Digital (S/PDIF)
• RJ45 Connection for network
• Conposite Video input & output for video sensing
• 2 -position Phoenix connector for power
• IR Emitter output (3.5mm)
• IR Emitter included
• Video -Sensing Probe included
• LEDs for signal detection, power detection, and activity status
• Dimensions: 8.25"W x 3.41"H x 2"D (210mm x 86.5mm x 50 mm)
• Weight: 1 lb (0.6 kg)
• NetPower™: 1

About NetStreams
Headquartered in Austin, Texas, NetStreams provides sophisticated networked audio leading the marketplace in technological innovation. NetStreams is committed to utilizing state -of -the -art human engineering to create home entertainment products that are truly user -friendly and future -compatible. NetStreams, The IP Based Audio Distribution Company. For additional information on NetStreams and its innovative products, please visit
www.netstreams.com. NetStreams is a registered trademark of NetStreams. DigiLinX, MediaLinX are trademarks of NetStreams. Texas Instruments and Burr Brown are registered trademarks of Texas Instruments.
# # #

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.