New High-Efficiency M 1200.2, M 700.2 and M 300.2 Power Amplifiers Combine High Performance with a Range of Power Options
Rusty Bennett /503 -978 -3349 Voice
J. B. Stanton Communications
860/542 -1234 Voice• 860/542 -0005 Fax
Stan Pinkwas/  788 -7777 Voice
Bryan Stanton / firstname.lastname@example.org
Carver Previews Powerful 2 -Channel Amps Ideal for Audio Systems and Home Theaters
New High -Efficiency M 1200.2, M 700.2 and M 300.2 Power Amplifiers Combine High Performance with a Range of Power Options
CEDIA EXPO, Indianapolis, September 10, 2004 - Carver®, a division of Phoenix Gold International, Inc., previews its new M 1200.2, M 700.2 and M 300.2 Power Amplifiers at the Custom Electronic Design and Installation Association (CEDIA) Expo 2004, beginning today in Indianapolis.
The new two -channel amplifiers are ideal for use in Audio and Home Theater systems, where multiple units can easily be installed, and also in distributed whole -house or multiple -zone audio systems. They are all powerful, solidly constructed, and built for quality and reliability.
Power handling capabilities vary from 300 watts per channel in the M 1200.2 to 95 watts per channel in the M 300.2, offering users a wide range of applications. The amplifiers can also be matched as needed, as they share numerous key features. These include high -efficiency spread spectrum switching amplifier technology utilizing TriPath®, which is designed to minimize the noise commonly associated with switching amplifier stages; a high current linear power supply with a Holmgren -designed torroidal transformer, which is an efficient, high -power design that minimizes hum and reduces magnetic leakage; and convection cooling, and a rear panel switch for bridged and parallel mono.
The amplifiers' LED displays include seven segments per channel and a standby indicator. Connections for each model include 3.5mm input/output jacks for a 12 -volt trigger or signal sensing auto -on, supporting power sequencing circuitry, XLR (balanced) and RCA (Unbalanced) inputs, and multi -way speaker outputs.
On the power side, the M 1200.2 Amplifier delivers 300 watts per channel into 8 ohms, and 600 watts per channel into 4 ohms, each with less than 0.5percent THD; and 1200 watts bridged mono into 8 ohms, with less than 1percent THD.
The M 700.2 Amplifier delivers 225 watts per channel into 8 ohms, and 350 watts per channel into 4 ohms, 20 Hz to 20 kHz, each with less than 0.5 percent THD; and 700 watts bridged mono into 8 ohms, with less than 1 percent THD.
The M 300.2 Amplifier delivers 95 watts per channel into 8 ohms, and 150 watts per channel into 4 ohms, 20 Hz to 20 kHz, each with less than 0.5 percent THD; and 300 watts bridged mono into 8 ohms, with less than 0.5 percent THD.
Carver's M 1200.2, M 700.2 and M 300.2 Amplifiers can be seen with other fine products from Phoenix Gold in Booth 1002, Indiana Convention Center, during CEDIA.
Phoenix Gold International, Inc. (www.pinksheets.com: PGLD), founded in 1985 and located in Portland, Oregon, designs, manufactures, and sells innovative high quality, high performance electronics, accessories and speakers to the audio market. The Company's products are used in the car audio aftermarket, professional sound installations, and in custom audio/video and home theater applications. Products are sold under the brand names Phoenix Gold®, Carver®, Carver Professional, and AudioSource®.
# # #