Phoenix Gold Introduces 3 Versatile Architectural Speakers for Home Entertainment Applications

New ATc6, ATc6DM with Dual Tweeter and ATi6 Two-Way Speakers Ideal for New Construction or Existing Installations

CONTACT:

Phoenix Gold International, Inc.
Rusty Bennett /503 -978 -3349 Voice
rbennett@phoenixgold.com
J. B. Stanton Communications
860/542 -1234 Voice• 860/542 -0005 Fax
Stan Pinkwas/[718] 788 -7777 Voice
stanp@jbstanton.com
Bryan Stanton / jbs@jbstanton.com

Phoenix Gold Introduces 3 Versatile Architectural Speakers for Home Entertainment Applications

New ATc6, ATc6DM with Dual Tweeter and ATi6 Two -Way Speakers Ideal for New Construction or Existing Installations


CEDIA EXPO, Indianapolis, September 10, 2004 - Phoenix Gold®, a division of Phoenix Gold International, Inc., introduces its new ATc6, ATc6DM and ATi6 Architectural Speakers at the Custom Electronic Design and Installation Association (CEDIA) Expo 2004, beginning today in Indianapolis.

The new two -way speakers are ideal for a variety of home entertainment applications, and can be used in virtually any area of the house, whether it's just being constructed or expanding its audio opportunities. The ATc6DM, which has dual tweeters, is designed for use in areas - such as bathrooms, dressing rooms and long hallways - where stereo imaging is impractical or not desired.

The ATc6 Architectural Speaker employs a coaxial design based around a 6 -1/2 -inch woofer with a mica -filled poly cone and butyl rubber surrounds. The woofer is complemented by a pivoting 22 -mm Ferro -Fluid cooled tweeter. Peak power capacity is 200 watts into 8 ohms, and the frequency response is 40 Hz to 20 kHz (+/ -2.5 dB) with 90 dB sensitivity. The outer diameter is 9 inches.

The ATc6DM Architectural Speaker employs a coaxial design based around a dual voice coil woofer and dual tweeters. The woofer is 6 -1/2 -inches with a mica -filled poly cone and butyl rubber surrounds. The tweeter is a dual 19 -mm model, also Ferro -Fluid cooled. Separate terminals on the speaker allow each channel of a stereo amplifier to connect to a single ATc6DM speaker. A switch allows the speaker to operate at 16 ohms for both channels or 8 ohms with a single channel connected.

Peak power capacity is 200 watts into 16 or 8 ohms, and the frequency response is 50 Hz to 20 kHz (+/ -2.5 dB) with 86/89 dB sensitivity. The outer diameter is 9 inches.

The ATi6 Architectural Speaker employs a rectangular design based around a 6 -1/2 -inch woofer with a mica -filled poly cone and butyl rubber surrounds. The woofer is complemented by a pivoting 25 -mm Ferro -Fluid cooled tweeter. Peak power capacity is 200 watts into 8 ohms, and the frequency response is 40 Hz to 20 kHz (+/ -2.5 dB) with 90 dB sensitivity. The outer dimensions are 8.5 x 12 inches.

All the speakers come with paint shields, allowing installers or owners to match any décor.

Carver's ATc6, ATc6DM and ATi6 Architectural Speakers can be seen with other fine products from Phoenix Gold in Booth 1002, Indiana Convention Center, during CEDIA.

Phoenix Gold International, Inc. (www.pinksheets.com: PGLD), founded in 1985 and located in Portland, Oregon, designs, manufactures, and sells innovative high quality, high performance electronics, accessories and speakers to the audio market. The Company's products are used in the car audio aftermarket, professional sound installations, and in custom audio/video and home theater applications. Products are sold under the brand names Phoenix Gold®, Carver®, Carver Professional®, and AudioSource®.

# # #

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.