RPG Diffusor Systems, Inc: Room Correction Milestone

RPG Diffusor Systems, Inc. will be introducing a new technology for controlling bass in home theaters. The new bass management module will provide room correction from 50 Hz to 500Hz with an option to extend the upper range to 5000Hz in only 4`!

Maximize The Surround Experience(TM):


Home Theaters and dedicated listening rooms often exhibit poor low frequency response with significant emphasis at modal resonances. This is especially true when they are sonically well isolated, due to massive boundary construction. Porous surface absorption is ineffective at these modal frequencies, because the air motion near walls and in corners is essentially zero, resulting in very low absorption efficiency. RPG developed its Modex(TM) line to address these problems. RPG is extremely proud to now introduce a new and unique addition to the Modex(TM) line, called the Modex Plate. The Modex Plate was developed by the Institute For Building Physics at the Fraunhofer Institute, and consists of a damped metal plate system. The Modex(TM) Plate offers a broadband low frequency absorption effective from 50 Hz - 500Hz in a thickness of only 4 inches. The Modex(TM) Plate has an attractive powder coat finish and can be surface mounted on walls or ceilings. With only 4` of space requirement it also integrates well with stretch fabric systems. Every now and then a new technology comes along that changes everything. You will be astounded at the transients and clarity of sound once the Modex(TM) Plate removes all of the masking low frequency reverberance. Now You Can Absorb More Bass In Less Space!

RPG Diffusor Systems, Inc.

Featured Product

Platinum Tools New ezEX-RJ45 Termination System for larger CAT6/6A cables

Platinum Tools New ezEX-RJ45 Termination System for larger CAT6/6A cables

The new EXOtm Crimp Frame and next generation (globally patented) ezEX-RJ45® Connectors provides the solution for terminating larger diameter Cat6/6A twisted-pair cables. Made in USA. • Conductor sizes up to .048", • Die sets for EZ-RJ45 & ezEX-RJ45 connectors • Feed-through EZ-RJ45 design verifies EIA568A/B wiring • One-step to crimp and flush cut/trim EZ-RJ45 conductors ***See us at ISC WEST #6035***