A new in-wall model offers custom installation solutions with the same high level of sonic accuracy found in Snell's newest mini-monitor
CEDIA SNEAK PEEK
FOR IMMEDIATE RELEASE
J. B. Stanton Communications
860/542 -1234 Voice • 860/542 -0005 Fax
Kim Wilson /  843 -5555Voice
 843 -5554 fax
Bryan Stanton / firstname.lastname@example.org
Snell Expands the Series 7 with a Companion In -Wall Speaker
A new in -wall model offers custom installation solutions with the same high level of sonic accuracy found in Snell's newest mini -monitor
CEDIA EXPO 2004, INDIANAPOLIS, IN. Sept. 7, 2004 - Snell Acoustics, acclaimed for their traditional handcrafted loudspeakers with leading edge designs, introduces a new in -wall speaker, the AMC 725, during the CEDIA Expo 2004 in Indianapolis.
Consistent with Snell's philosophy to offer solutions for all applications, they are introducing the AMC 725, which is based on the K7 mini -monitor that was recently introduced in their new Series 7.
The AMC 725 is tuned to conform to the sonic characteristics of the Series 7 models, so it is possible to mix any speaker in the series, be it in -wall, on -wall or floor standing and be assured perfect timbral matching. For enhanced performance a new crossover was designed to "tune" this new in -wall model to the in -wall boundary, and uniquely extend bass in a small volume cabinet.
The AMC 725 is equipped with a 1 -inch cloth dome tweeter with ferrofluid cooling and Snell's exclusive "Directed Power" waveguide. The AMC725 houses a single 5.25 -inch copolymer mid/bass driver with butyl rubber surround.
To achieve the performance capabilities of a freestanding monitor, the flushmount designs used on the AMC725 overcome three major factors that in the past limited in -wall speaker performance. First, to insure predictable response, regardless of placement or wall type, the speaker is placed inside a sealed, aluminum enclosure, which defines bass response, just like a conventional loudspeaker's enclosure, and reduces sound transfer to other rooms.
Second, specific materials are used to control resonance. The drivers are mounted to a specially damped MDF baffle, constructed in three layers to enhance bass/midrange clarity and deaden wall resonance. The baffle is then secured to the well -damped, heavy gauge aluminum enclosure.
Third, since flush mount speakers can not "toe -in" to reproduce a proper soundstage, the "Directed Power" tweeter steers upper frequencies toward the listening area, in 45 -degree increments, assuring spatial realism and proper stereo imaging commonly associated with high -performance monitors.
The AMC 725 is very easy to mount in any conventional stud wall with the swivel action "dog leg" clamps. The speaker is equipped with high -quality dual, 5 -way gold -plated, solid metal binding posts that can accommodate pins, banana plugs, spade lugs and bare wire up to 12 -gauge.. Additionally, they are magnetically shielded for use in proximity to video monitors.
The AMC 725 is finished in a paintable, matte white, and has a perforated metal grille. Cloth grilles and custom paint are optional. Like all Snell speakers, the AMC 725 speakers are tuned to .5dB of the reference master and can be special ordered in most woods and finishes,
The new custom solutions AMC 725 is priced at $750 each and will be available in 4th Quarter 2004. All of Snell's new products can be seen in Booth 650 at the Indianapolis Convention Center during CEDIA Expo 2004.
For further information, visit the company`s Web site at www.snellacoustics.com.
For high -resolution artwork, contact Angela Jennette by email email@example.com or phone  542 -1234 ext. 118