Gefen's New 1x4 VGA Hub Amps Video Four Times

Compact, Add-On Hardware from Gefen Sends One Computer's Video Graphics to Four Displays and/or Projectors at the Same Time

WOODLAND HILLS, CA - June 18, 2004 - When you need to supply multiple video monitors with the same computer -generated data, Gefen's 1x4 VGA Hub comes in handy. It's cost effective; just $199 gets you the small metallic box that connects to the computer on one side and outputs to four VGA video monitors on the other side. A bargain when compared to the cost of purchasing separate computers for each monitor.


Most computers are equipped with a maximum of two video outputs, but with the 1x4 VGA Hub, the same computer graphics can be sent to all four displays at multiple resolutions up to 1920x1200.

Computers with an analog video graphics card that connect to the display through an HD -15 connector, a common computer connector, are compatible with the 1x4 VGA Hub as well as monitors, projectors and plasma displays with the same connector and cables.

Simply designed for performance and ease, the 1x4 VGA Hub takes just seconds to install. It requires only a 5 -volt external power supply (included) to drive all four video displays.

Gefen's 1x4 VGA Hub is available for purchase online at www.gefen.com or through a Gefen reseller, located around the world and listed online.


About Gefen Inc:

Gefen provides computer and electronics connectivity solutions through its ex -tend -it Professional Series, which offers multi -platform extension, switching, distribution and conversion technologies. Gefen is currently pioneering a full line of HDTV products that enable high definition digital video to be split, switched and extended. A selection of HDMI, fiber optics, DVI and CAT5 cabling is available through Gefen as well as audio, USB, CAT5, PS/2, RS232 and similar peripheral support solutions. Detailed product information may be found at www.gefen.com.





Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.