THIEL debuts long awaited Integrator at HES

Although rumors of this innovative electronic device have been swirling throughout the audio community for some time, Jim Thiel actually addressed the media in New York City with a working Integrator in hand at the May 2004 HES event.






THIEL INTEGRATOR

The THIEL Integrator is an active electronic device designed to achieve near perfect integration between a THIEL subwoofer and virtually any pair of "main" loudspeakers. The Integrator can be used in augment mode to extend the bass range of the system's main speakers or in crossover mode to transfer the bass energy from the main speakers into the subwoofer, allowing the overall system to play at higher output levels. The Integrator's SmartSub microprocessor technology analyzes the characteristics of virtually any main speaker system based upon parameters entered into the Integrator by the end -user through a series of simple prompts. The Integrator then automatically calculates the subwoofer response that provides the most seamless, musical total system performance. The Integrator utilizes two -channel circuitry so that stereo bass can be preserved when multiple subwoofers are employed, and it comes complete with a remote control, balanced and unbalanced low level inputs and outputs, and can be used with up to 16 subwoofer modules in very large systems.





Contact: Micah Sheveloff
WIRC Media Tactics
203 -795 -3141
wirc1@earthlink.net


Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.