AKCP unveils version of sensorProbe2, with 10 dry contact inputs

AKCP, provides easy-to-use, web-enabled products for environmental and security monitoring, today unveils version of sensorProbe2 with multiple dry contact support, which can monitor upto 10 dry-contact inputs.

A low cost alternative for dry contact monitoring, the sensorProbe2D is designed for small and medium monitoring requirements, such as a small computer room temperature and UPS status, security etc. The sensorProbe2D comes in a 0 U Rackmount box with 2 full autosense RJ45 ports for connecting any of AKCP`s intelligent sensors. The 10 dry contact option gives the sensorProbe2D the ability to have up to 5 dry contact inputs per RJ45 port, giving a total maximum possible inputs of 10, by utilizing both of the RJ45 sensor ports. The 10 dry contact option includes a special dry -contact cable which has 5 dry -contact input connectors, which can be plugged into any of the 2 autosense RJ -45 ports.

The sensorProbe2D is a completely embedded host and comes with a proprietary Linux -like Operating System. It is equipped with a TCP/IP stack, internal web Server, e -mail, and full SNMP functionality. The sensorProbe2D is a `plug n play` device and is extremely easy to use and maintain. The installation process is also simple. The sensorProbe2D with the 10 dry contact option is priced at $475, which includes a 1 foot temperature sensor and one 15 foot 5 -input dry -contact cable.

The sensorProbe2D comes with a new CPU that is 3 times higher speed of the earlier version of sensorProbe2A, faster network connection, new web interface similar to sensorProbe8 series of products. Additional features include, remote syslog interface, subnet mask, multiple email addresses. It also includes a battery -backed time of day clock. The sensorProbe2D also has advanced filtering options for Traps and Emails.

The sensorProbe2D is supplied with full SNMP and a complete MIB allowing its interface to SNMP based Network Management systems such as HP OpenView®, IBM Tivoli®, What`s Up Gold and others.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.