Access Control Combo Cable by Tappan Wire & Cable

Tappan Wire manufactures a composite cable under common plenum jacket for card reader and access control systems

BLAUVELT, New York - - - - March 2, 2004 - - -Tappan Wire & Cable announces their production of a combo cable suitable for Building Automation and Access Control Systems.


The typical configuration of this cable is comprised of four single jacketed cables with an overall common jacket. Gauge sizes are 18awg and 22awg. Each individual cable is printed "Card Reader", "Request to Exit (REX SPARE)", "Door Contact" and "Lock Power/PIR" for ease of identification.

This cable is used for inter -building automation systems where a "home run" topology is used. The contractor now has the ability to pull all of the appropriate cables for the installation in one run and then be able to terminate each component where applicable.

Tappan Wire & Cable can also custom build other variations of this combo cable to suit different system designs. Some of these variations include: multi -paired cables, shielded cables, different individual and overall jacket colors, non -plenum configurations and custom jacket printing. Minimum run quantities start at 10,000 feet per design.

Tappan Wire & Cable, Inc. founded in 1978, is a leading manufacturer of low & medium voltage cables, which are sold through distribution throughout North America, South America and Europe. Products include electronic/RS232 cable, fire alarm, sound & security, tray cable, high temperature cable, chemical resistant cable, coaxial video cable, automotive, industrial, water blocked direct burial cable, home automation & home theater cables.

Be sure to visit us at ISC West in Las Vegas from March 31 to April 2, 2004.

For more information or technical questions please contact us at 1 -800 -WIRE -911 or visit us on the web at www.tappanwire.com.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.