TruAudio introduces MR1260 Multi -Room Amp

TruAudio, based is Salt Lake City, Utah, is quickly becoming known for their growing line of architectural loudspeakers.

By offering a lifetime warranty and very unique products, TruAudio offers the custom installer solutions to various real world problems. TruAudio products are designed for installers by installers. In fact, more than 50% of TruAudio`s employees have worked in the custom installation field prior to joining TruAudio.


MR1260 12 x 60 Distribution Amplifier - MSRP $2895.00

The MR1260 is a 12 channel, 6 zone amplifier that provides 60 watts RMS to each channel @ 8ohms or 80 watts at 4 ohms. Channel pairs can be bridged for 160 watts at 8 ohms. It features both a multi and single channel input bus with independent level controls for each channel. Has Auto -on signal sensing function. High quality Phoenix connectors allow the use of speaker cables of up to 14 gauge.



Specifications:
Channels:
12 channels, 6 zones

Power output, continuous:
60 watts/ ch @ 8 ohms


80 watts/ ch @ 4 ohms

Power output, short term:
100 watts/ ch

Bridged power output:
160 watts/ ch @ 8 ohms

Total Harmonic Distortion:
0.05%

Signal to noise ratio:
Great than 100dB

Frequency range:
18 Hz. to 50k Hz. @+ - 2 dB

Damping factor:
Greater than 400

Input impedance:
20K ohms

Certifications:
CE, CSA

Dimensions:
5 ¾` H, 17` W, 17` D

Weight:
46.9 lbs

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.