TruAudio introduces in -wall Sub88A

TruAudio, based is Salt Lake City, Utah, is quickly becoming known for their growing line of architectural loudspeakers.

TruAudio products are designed for installers by installers. In fact, more than 50% of TruAudio`s employees have worked in the custom installation field prior to joining TruAudio.


Sub 88A In -Wall Subwoofer - MSRP $1200/each

With the Sub 88A there is no longer a need for a box subwoofer sitting on the floor. The Sub 88A fits into a standard 3 1/2` wall cavity using the included MDF in -wall, damped enclosure. Our 250 watt SA -250 Mono subwoofer amp will drive up to two Sub 88A. Any good power amp of 150 watts or greater can also be used.

Specifications:
Woofer:
Dual 8` aluminum with rubber surround

Impedance:
8 ohm

Power handling:
200 watts RMS

Frequency range:
37 Hz. to 150 Hz.

Sensitivity:
90 dB

Grill:
Aluminum, heavy gauge w/ thin layer of Dacron.

Screws:
Stainless steel

Crossover:
Variable or can be bypassed

Adjustments:
Frequency & Phase

Mounting:
Dog ear mounting tabs

Cutout Dimensions:
21 3/4` H, 11 1/2` W

Finish Dimensions:
22 3/4` H, 12 3/4` W, 3 3/4` D


Enclosure Dimensions:
46` H, 14` W, 3 1/2` D

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.