Intec Automation Inc. announced the release of microCommander v2.

microCommander's interactive graphical interface offers more control capability than just timers and logic

Intec Automation Inc. announced the release of microCommander v2. This highly interactive HMI software for automation and control offers support for X10 devices, in addition to conventional sensors and actuators. This enables X10 devices to interface seamlessly with non -X10 sensors and actuators under the control of any of a number of popular embedded microcontrollers or single board computers (SBCs).


Until now, most critical and non -critical functions have been controlled by separate automation systems. With microCommander software, less -critical X10 functions can be handled by the same SBC that is controlling critical sensors and actuators. This combined automation solution offers the advantage of high reliability of conventional control devices with the cost savings of X10 devices which are so inexpensive to install.

This entire hybrid system is accessed via a unified user interface with microCommander's visual control HMI. The logic for the control system is developed using microCommander's simple "programming without programming" Component technology with Internet connectivity and a rich assortment of virtual instruments built -in.

A free download of microCommander is available from www.microCommander.com, so integrators and users can experience just how easy it is to program microcontrollers with microCommander by actually doing this on a live microcontroller connected to the Internet.

Learn more by calling Intec Automation, Inc. at 1 -866 -721 -5150 (toll free) or going to www.microCommander.com.

About Intec Automation, Inc:

Intec Automation Inc. has been providing microcontrollers and software development tools since 1993. Intec's microcontrollers are sold mainly in USA and Canada, with a numerous clients world wide. Intec's flagship product is microCommander, a HMI software suite that brings interactivity to microcontrollers.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.