NEW EXTREME HDTV CABLES FROM GEFEN OFFER HIGH -PERFORMANCE TRANSMISSION FOR HIGH DEFINITION SYSTEMS

Convergent cabling from Gefen supports long and short distance HDTV (high definition television) resolutions by combining fiber optics and DDC signals into a single cable with DVI connectors.

WOODLAND HILLS, CA [January 21, 2004] Convergent cabling from Gefen supports long and short distance HDTV (high definition television) resolutions by combining fiber optics and DDC signals into a single cable with DVI connectors. Because video and control signals are combined, the cabling enables extension of high definition signals for televisions, projectors and even DVI -equipped computers. Fiber optics components ensure the integrity of the visual data throughout transmission, guaranteeing high definition resolutions up to 1920 x 1200, outperforming the standard copper -plated DVI cables. HDTV Extreme Cables are currently available in pre -cut lengths of 33, 66, 100, 166 and 300 -feet. They require a 1.5 -inch clearance in conduit and range in price from $609 to $2349. Custom lengths are also available.


For those working with the new HDMI (high definition multimedia interface), Gefen provides a 6 -foot DVI to HDMI cable to connect a DVI display to a HDMI source or vice versa. A selection of HDMI cables in varied lengths for HDMIs uncompressed video and mutli -channel audio is also available online at www.gefen.com.

About Gefen Inc:
Gefen is a computer and electronics connectivity solutions provider. Gefen's ex -tend -it Professional Series specializes in KVM (keyboard, video, mouse) extenders, switchers, distribution amplifiers, converters and cables. Gefen is currently pioneering a full line of DVI and HDTV products that enable digital video signals to be split, switched and extended for home theater and electronics systems. Detailed product information may be found at www.gefen.com.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.