Amphony to showcase its 2.4 GHz Digital Wireless Audio Transmitter / Amplifier, Model 1050 at CES

BERLIN, December 16, 2003 - Amphony will unveil its 2.4 GHz Digital Wireless Audio Transmitter / Amplifier, Model 1050 at the 2004 Consumer Electronics Show.

BERLIN, December 16, 2003 - Amphony will unveil its 2.4 GHz Digital Wireless Audio Transmitter / Amplifier, Model 1050 at the 2004 Consumer Electronics Show, which is capable of transmitting audio to loudspeakers without wires and without any audio degradation.


"In most circumstances, it is practically impossible to run wires to rear speakers in a home theater setting or to speakers in another room," said Gunter Fellbaum, Marketing Director at Amphony.

"Previous wireless audio solutions suffer from two major drawbacks - noise and audio distortion. Our technology provides true CD quality wireless audio by employing digital audio transmission without any audio compression and the inherent audio degradation and latency. The Model 1050 Receiver / Amplifier incorporates a digital class -T stereo amplifier, which features high power efficiency while greatly reducing audio distortion found in conventional class -D digital amplifiers. The receiver / amplifier has a maximum output power of 50 Watts per speaker and connects to any passive speaker."

The 2.4 GHz Digital Wireless Audio Transmitter / Amplifier, Model 1050 has a suggested retail price of $129. It includes a digital audio receiver / amplifier and a digital audio transmitter that connects to most types of audio equipment. Additional receiver / amplifiers can be purchased separately to operate from the initial transmitter.

Headquartered in Berlin, Germany, Amphony is a startup technology company that has become the leading provider of digital wireless headphones and audio transmitter products. Amphony specializes in the development of electronic products and technologies and is serving the consumer as well as the OEM market. In the U.S., Amphony products are sold by Amphony Corp., an affiliated Amphony company.

For more information, please contact:

Gunter Fellbaum
Marketing Director, Wireless Audio
Amphony
+49.30.2759 -2979
gfellbaum@amphony.com
www.amphony.com

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.