CRESTRON INTRODUCES CLW -DIM WALL BOX DIMMER

New dimmer is part of Crestron's full range of lighting and automation products, including dimmers, control modules and home automation cabinets.

The Crestron CLW -DIM is a stand -alone wall box dimmer with a three -position mode selection switch that can also act as a Cresnet® device that reports to a Crestron control processor.


Like all Crestron wall dimmers and switches, the Crestron CLW -DIM wall dimmer integrates easily into any system. The dimmers fit into standard electrical gang boxes and Decora™ style faceplates. Each dimmer operates independently of the Crestron system and is rated at 800 watts.

The CLW -DIM has four preset lighting levels that can be adjusted and also includes two isolated, nonpolarized Cresnet wires (plus a ground wire) for connecting to the Cresnet network over a twisted pair wire with shield. In the absence of Cresnet communications, the dimmer can still be used to control lighting.

The CLW -DIM is part of Crestron's full range of lighting products, including dimmers, control modules and home automation cabinets. Crestron Lighting is part of the Total Home Technology Package - available only from Crestron.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.