Revotech Industries International Introduces UltraJAX RJ Connectors.

Revotech announces the release of the UltraJAX High Density, Dual Function RJ connector. With UltraJAX, one connector provides the capability and functionality of two.

Los Angeles, CA, August 15, 2003 - Revotech UltraJAX represents the first major innovation in RJ connectivity, providing high -density contact capabilities within a standard sized RJ connector. Contact assemblies are housed in both the top and the bottom of the UltraJAX female connector. Existing, single -sided RJ11 and RJ45 connectors insert into the connector in multiple directions supporting multiple functionality, while UltraJAX, double -sided male connectors utilize both sets of contacts, doubling the capacity and functionality of a single connector. Revotech UltraJAX doubles the port count of standard equipment in the networking and telephone environments, as well as any others utilizing RJ ports.


UltraJAX for Unlimited Applications

Revotech UltraJAX was developed for multiple applications, and is available in RJ45 and RJ11 formats, as well as an RJ11/RJ45 combo. PCB mount UltraJAX female connectors may be designed into current and future products employing RJ connectivity, doubling the port count in networking equipment such as hubs, switches, routers, wall plates and adapter cards, and in telephone equipment such as hand sets, wall plates, and patch panels. UltraJAX is also available in standard keystone format for insertion into a standard wall plate. In the home, utilizing a UltraJAX female wall plate along with an UltraJAX male "Y -Cable," UltraJAX eliminates the need for additional splitters. One twisted pair wire splits two directions from a single UltraJAX female connector, supporting configurations such as a telephone/modem, etc.

Revotech UltraJAX's design allows for the usage of existing, single -sided, RJ male plugs or the new UltraJAX, double sided male plug and "Y -Cable." The UltraJAX male plug provides contacts on both the top and bottom, utilizing both sets of connectors in the RJ11 or RJ45 female UltraJAX. Current, single -sided male RJ plugs, may be inserted into the female UltraJAX in either direction, depending on the functionality desired. Secondary functionality is achieved by simply switching the direction of the male plug within the female UltraJAX, thus accessing the second set of contacts.

Doubles the Contact Capacity and Supports Multiple Applications

Multiple port and stackable connectors have become commonplace on networking hubs, switches, routers and PC adapter cards, and homes and office buildings are pre -wired for telephone and network connectivity. Revotech UltraJAX effectively doubles the capacity and functionality with no increase in size, providing unprecedented efficiency.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.