HTH announces PLM-24(tm) DevBoard

The new PLM-24 DevBoard is intended to be used with our popular PLM-24 Power Line Modem and will get your applications up and running in a shorter time since it includes everything you need to interface you circuit to the power line.

PLM-24 DevBoard includes the AC coupling network, complete power supply and a large prototyping area (large enough for a 40-pin DIL) for your own applications. The PCB is designed to fit in a standard 120 x 65 x 40 mm plastic case available from several different manufacturers with or without AC plugs according to the standards of different countries.

The PLM-24 DevBoard also have a multi feature connector for direct interface with standard SSR's available from several manufacturers (CP Clare, SHARP, Solid State Optronics etc.) or you can use this connector to interface with your own triac circuit.

Features.

- Directly interface with our PLM-24 Power Line Modem.
- PCB designed to fit directly in a standard plastic case.
- Multi feature connector for direct interface with standard  SSR's (Solid State Relay).
- Secondary AC voltage available at the prototype area (for  zero crossing detector).
- Large prototyping area 50 x 45 mm (approx. 400 holes).
- PCB 110 x 57 mm (4.3 x 2.3 inch).
- Complete +5 V and +10 V power supply @ 250 mA for PLM-24  and your circuit.
- Provides connectors for AC in and AC out.
- Available in 230 VAC/50 Hz and 110 VAC/60 Hz versions.
- AC part of PCB capable to handle up to 230 VAC @ 8 A.

For more information about PLM-24 Power Line Modem and the new PLM-24 DevBoard see our web-site at the URL given below or send e-mail to info@hth.com.

http://www.hth.com/plm-24/