Author: David Feller, BOCS Company
This is the eighth chapter of a multi-part series covering all aspects of low voltage wiring in the home: entertainment, security, automation, and future planning. A new section will be published every few weeks.
Daisy chain telephone
Yes, you can save wire by installing phone lines the “old fashioned way” and simply string a single wire from room to room, but don’t be fooled. A “Home-Run” installation with each room running all the way back to the media cabinet has huge benefits. It works better with DSL installations, it allows the use of any wire for Data or other applications if you need it, and troubleshooting a faulty wire is much easier.
Share neutral for ceiling fans
A typical ceiling light fed from a switch uses a 2 wire + ground romex cable (14-2 or 12-2 i.e. black, white and bare). If you later decide to install a ceiling fan in that room, the typical installation is to put a dual switch next to the door – one for the light and one for the fan. The temptation is to use the same wire running up to the fan to run both circuits hijacking the black for light, white for fan and bare for neutral leaving off the safety ground altogether. Will it work? Yes, Is it safe? Absolutely not. You have three choices:
Share Ethernet and phone
Only have a single CatX wire to a room and you need both data and phone? 10MB Ethernet uses only 4 wires and telephone uses 2 so theoretically you can connect both services to the same cable and split them back out at each end into the proper RJ11 and RJ45 jacks. Can you make it work? Yes. But consider the issues:
Only one more chapter to go in this feature - it will be in our next eMagazine issue so stay tuned.
Other good how-to and pre-wire guides:
Products referenced in this guide:
With 20 years in the Consumer Electronics space, David pioneered wireless LAN for home use in partnership with Linksys, rotating storage for portable electronics at Cornice, and is most recently a founder and chief marketing officer of BOCS Inc, the manufacturer of a new whole home A/V distribution system for retrofit applications