The system provides residents and caregivers access to the complex and their apartment through their iPhone using the Snap-Link app.

Leviton’s OmniPro ll Helps Provide Enhanced Access for Assisted Living Residents

Contributed by | Leviton

Leviton Security & Automation Installer C2 Automation, was recently contracted by the Transport Accident Commission (TAC) to provide residential automation functionality to six assisted living apartments in Melbourne, Australia. The facility houses a number of residents with acquired brain injuries and permanent physical disabilities resulting from serious road accidents.

Leviton’s range of integrated automation solutions were specified by C2 Automation to enable increased access and mobility for residents, and higher levels of monitoring and service for carers.

The system provides residents and caregivers access to the complex and their apartment through their iPhone using the Snap-Link app. This can be done from within the complex or remotely if required in an emergency. Residents also have control of various preconfigured ‘scenes’ such as “Arrive Home” – where Leviton’s controller opens doors, turns lights on, adjusts temperature, lifts blinds and logs the event with the caregiver so they know the resident is home.

This project utilized the following Leviton Security & Automation products:

  • OmniPro II controllers
  • Consoles
  • Wireless Receivers
  • Extended-range temperature sensors
  • Snap-Link Mobile for iPhone
  • Snap-Link Mobile for Android

The following products were also integrated into the project:

  • Somfy Blind Control
  • C-Bus Wireless Lighting
  • 2N SIP Servers
  • Ditek Door Openers
  • Split System Air Conditioners

Personal Carer, Brittany Bosch said, “…the system is very simple for us to use and offers quick and efficient monitoring. The best thing is that it ultimately allows our residents to be more independent.”

Leviton’s OmniPro II controller also offers a comprehensive activity log. In addition to the monitoring performed by carers for safety and security purposes, the system provides valuable insights and data for a study conducted by Monash University in Melbourne on disability care.

This project was automated by:

C 2 Automation

Chris Mark
(Technical Integration) 0449 883 520

Chris Hart van
(Sales and Installation) 0414 951 932

Located: Essendon VIC, Australia
Email: sales@c2automation.com.au

 

About Leviton

Since 1985, Leviton Security & Automation has been the leading manufacturer of automation and control products for homeowners and businesses around the world.

Products are sold in over 80 countries through a worldwide network of Distribution Partners and installed by over 1,000 trained dealers.


Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

RETRO-M is designed to replace existing Home Intercom Systems and operate on existing 3 and 4 wire systems. BLUETOOTH you music by adding the BT-RECEIVER. No need to remove existing master wall housing, trim plates available to cover those large holes. The RETRO-M intercom unit has a built-in AM/FM radio. Plug in mp3 players such as iPod, iPhone, Zune or any other hand held player into the master and share your music with the entire family. Choose between two music sources; listen to the radio in one room and the mp3 in another room.