Up until now the only way to get the latest Tom Cruise movie in your home on the Friday night it hits theaters was to become a member of the exclusive Bel-Air Circuit.

First-Run Movies in Your Home Theater

Eric Thies | DSI Entertainment Systems

A lot of our entertainment industry clients are building private home theaters and asking us how they should go about getting first-run movie content for their theater. Up until now the only way to get the latest Tom Cruise movie in your home on the Friday night it hits theaters was to become a member of the exclusive Bel-Air Circuit. If you have enough pull in the entertainment industry, a few phone calls will get you whatever movie you desire on a hard-drive while it is still in theaters. The drawback is that you need to purchase the same type of projection equipment as the local Arclight theater. 

The cost for this equipment ranges from $125-250K installed, but that is not the biggest obstacle. The more challenging obstacle is fitting this large and noisy projector (see above) into a small private home cinema. A lot of our Hollywood bigwig clients already have large projection booths that used to house 35mm projectors. If your theater already has one of these, you are golden. If not, you need to create a fairly large space to house the projector.

The new kid on the block is Prima Cinema. This is a very specialized server with a cost of $35,000 that allows you to download and playback first-run movies without the need for all of the professional cinema gear. Since the Prima Cinema Player is a home video device, the unit is much less complicated to install and operate. The current downside to Prima Cinema is that not all movies are available (pending forthcoming agreements with some of the major studios). To read more details about Prima Cinema, see our previous post here > Prima Cinema - Movies in your Home Theater During Theatrical Release

Here is a quick pros and cons list if you are debating between a D-Cinema system and a Prima Cinema Player, and just to be clear, we design and install both options -

Barco D-Cinema projector

D-Cinema Pros:

  • Most every major release is available through the Bel-Air Circuit
  • New technologies such as Dolby Atmos and HFR (High-frame rate) video are available with D-Cinema systems
  • Movies are free of charge from the studios
  • You can run the film more than once typically

D-Cinema Cons:

  • Needs real estate to house the projection system (projector is big and noisy)
  • Does not play as nicely with home video content
  • Not super-easy to operate (designed for commercial movie theaters, not homes)
  • You typically need a courier service / projectionist to deliver and load the movie at a cost of $200-$500 per movie
  • Initial hardware expense ($125-250K)
  • You need to be in the Hollywood elite to join the invitation-only Bel-Air circuit

Prima Cinema movie player

Prima Cinema Pros:

  • Easy-to-use
  • Works with standard home cinema projectors and displays
  • All the movies are automatically delivered to the server
  • Lower cost
  • No need to be a Hollywood power player to get the content
  • No need to buy pro gear
  • No special space or cooling requirements

Prima Cinema Cons:

  • Not all movie titles are available
  • Newer theater-only film technologies are not available yet on Prima Cinema
  • Movies are pay-per-view (no multiple viewing) at $500 per film

Comments (0)

This post does not have any comments. Be the first to leave a comment below.

Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.