It's not always desirable, or practical, to hang a projection screen in an AV installation. Mighty Brighty projection screen paint solves this problem by allowing virtually any surface to become an invisible screen.

Case Study - Mighty Brighty Projection Screen Paint

Renny Vos | BMB Electronics

Recently Verhoeckx Afbouw completed a notable project at Volker Wessels’ head office in Amersfoort, Netherlands. “Notable” may be a bit of a misnomer, as it’s invisible when it is not in use.

The area in the image above, which is used for weekly meetings and internal courses, has is semicircular, so not exactly ideal for a conventional projection screen.  In order to create a projection-friendly surface, the wall was treated, on both sides, with Mighty Brighty projection screen paint. The total area covered was more than 350m2. Now images can be projected on either side of the wall, as can be seen below. Due to the size of the surface, the installer chose to spray the paint instead of rolling it, resulting in a very professional look.

As soon as a meeting ends, the projector is turned off and there’s no evidence of any kind of projection screen.

About Mighty Brighty

An image projected on Mighty Brighty Projection Screen Paint has much better contrast and brightness than that of a plain white wall. In fact, it exhibits the same quality as a professional projection screen. Further the screen is always the size and aspect ratio for any projector and is invisible when not in use.


Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.