We asked some of the Dealer / Integrators in our company directory to send us examples of projects they have completed so we could share them.

Project Showcase - WannaGetWired Rewires Older Building In Ontario

Frank Faggiani | WannaGetWired

April 2010

Project Showcase - WannaGetWired Rewires Older Building In Ontario

Author: Frank Faggiani, WannaGetWired

We asked some of the Dealer / Integrators in our company directory to send us examples of projects they have completed so we could share them. If you have one you'd like to submit please email news@hometoys.com and we'll send you a template to use so we can publish it here.

 

Company Name: WannaGetWired

Contact: Frank Faggiani

Phone Number: 416 456 2369

Email address: wannagetwired@rogers.com

Website address: www.wannagetwired.ca

 

Project location: Ontario

Project budget: open

List of Products used: Cat5e, wiremold, B&T surface mount jacks, Hammond Enclosed Rack

Unusual situations or problems that you came across: Older bldg. that had an addition put on without a cable or wire corridor to traverse the two.

 

Customer was moving into a new office location but the building although renovated was approximately 100 years old. Customer wanted to use existing stations 'as is' but after a couple of tests we found defects. The quote was ball park as the amount of time to create a corridor to bring new wires from the server location to the other side of the bldg had a degree of difficulty. Also the location for the server was an existing closet which required air conditioning. The existing wiring was nothing short of a 'birds nest' located in a furnace room.

 

The Birds Nest

The Birds Nest

Server Room

Server Room

Back Office

Century old elevator shaft

 

 

Contact:
Frank Faggiani, (416) 456-2369, wannagetwired@rogers.com


Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Platinum Tools New ezEX-RJ45 Termination System for larger CAT6/6A cables

Platinum Tools New ezEX-RJ45 Termination System for larger CAT6/6A cables

The new EXOtm Crimp Frame and next generation (globally patented) ezEX-RJ45® Connectors provides the solution for terminating larger diameter Cat6/6A twisted-pair cables. Made in USA. • Conductor sizes up to .048", • Die sets for EZ-RJ45 & ezEX-RJ45 connectors • Feed-through EZ-RJ45 design verifies EIA568A/B wiring • One-step to crimp and flush cut/trim EZ-RJ45 conductors ***See us at ISC WEST #6035***