For clean, attractive terminations, one option is to install wall plates that utilize keystone jacks for Ethernet connections. For small projects that only require a few jacks, an easy option is a toolless keystone jack. These do not require the use of a punch down tool like the 110 style keystone jacks

Networking 101: Utilizing a Toolless Keystone Jack

Sabrina Williams | Firefold

Networking 101: Utilizing a Toolless Keystone Jack

Author: Sabrina Williams, Firefold

When setting up a home network, aesthetics are important to any installer. This is particularly true if that network happens to be located in your own home. For clean, attractive terminations, one option is to install wall plates that utilize keystone jacks for Ethernet connections. For small projects that only require a few jacks, an easy option is a toolless keystone jack. These do not require the use of a punch down tool like the 110 style keystone jacks.

Connecting the cable to the jack is simple. The first step is to use a jacket stripper to cut approximately one inch of the outer jacket from a CAT5e or CAT6 cable, exposing the wires. The stripper should be rotated clockwise around the cable until the jacket is fully detached. Remove the cut piece and separate the wires.

Each toolless keystone jack comes color-coded to match the individual wires to the proper connection points. There are two configurations or schemes for Ethernet wiring: “A” and “B”. All terminations should follow the “B” pin/pair assignments, as “B” is the latest standard. The color progression should be: solid orange, orange/white, green/white, blue/white, solid blue, solid green, solid brown, and brown/white.

The jack will also come with a black clamp that can be used to hold down up to four wires while you insert the remaining wires into place.

Once all wires are inserted into their matching slots, remove the black clamp and snap the cover into place. A white clamp should also be included. This clamp is inserted into the middle slot on top of the jack, locking the cables into place. The black clamp can be discarded.

That’s it! The keystone jack is now complete and can be inserted into a keystone wall plate. To view a variety of colors and options on both keystone jacks and wall plates, visit www.FireFold.com.


Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.