The Date/Time schedule is a feature in the PLC that gives the homeowner a higher level of control over his/her day to day switching needs.

PLC - Date/Time Schedule

Eugene Kowch | P.I.D. Consultants Inc

Programmable Logic Controller
 ---- Date/Time Schedule----

By Eugene Kowch, P.I.D. Consultants Inc.

The Date/Time schedule is a feature in the PLC that gives the homeowner a higher level of control over his/her day to day switching needs.


The programmable logic controller (PLC) is an all-in-one control solution for residential applications. The PLC gives the homeowner that additional level of control over his home electrical requirements. One level of control the PLC offers is a Date/Time schedule feature. What the Date/Time schedule feature allows the homeowner to do is have various electrical devices, (lights, drapes, etc.) to automatically operate based on a pre-determined date or time. Most PLC's have a built in date/time clock. Some PLC's also have an astronomical clock which calculates the sunset/sunrise time for a given longitude/latitude coordinates.

One obvious application for a Date/Time schedule is turning the home landscape lights on at sunset and off at midnight. The landscape lights will come on/off every night based on the preset times programmed in the PLC. If the homeowner wants to override this function, he only has to go to the keypad that controls the landscape lights and turn them on or off. The Date/Time schedule does not hold the output, (landscape lights), on or off.

Another application is to ramp on lights at some time before sunset. When the PLC reaches the preset time, (let's say 15 minutes before sunset), the picture lights in the hallway start coming on and ramp to full on after 15 minutes. As it gets darker outside, it gets brighter inside.

If the homeowner has motorized blinds in the home, the Date/Time schedule allows the homeowner to lower his/her blinds whenever the sun light may be to bright. The blinds can then be automatically raised after the sun passes by. This feature is great in protecting expensive rugs, furniture or pictures from fading.

The Date/Time schedule is useful in many more applications. When connected to the security system status, the PLC could give the home a lived in look by turning various lights on/off at different times, only when the security system is armed in the away mode. Xmas lights would only turn on/off during the holiday season. All lights in the home could be turned off at some pre-determined time in the morning to ensure no one left lights on in some remote room in the house. The Date/Time schedule is a feature in the PLC that gives the homeowner a higher level of control over his/her day to day switching needs.


Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseTâ„¢ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.