PLC's have communication ports that can be configured to talk all kinds of protocols. One of the most useful in home systems is the ASCII In/Out non-sequence protocol.

Volume Control with Prog Logic Controller

Eugene Kowch | P.I.D. Consultants Inc.

Programmable Logic Controller
Communicates RS-232

 By Eugene Kowch, P.I.D. Consultants Inc.

PLC's have communication ports that can be configured to talk all kinds of protocols. One of the most useful in home systems is the ASCII In/Out non-sequence protocol.


System integration is becoming an important issue in the home automation scene. New homes have a number of systems: security, heating, lighting, drapery, audio, video, etc. Each system has its own controller and takes care of its own I/O (Inputs and Outputs). At present, the homeowner needs to learn how each system works and remember the different operational commands to control their electrical environment. This process can be simplified with the integration of a Programmable Logic Controller (PLC).

Most home systems are coming out with an RS232 communication interfaces, which enables two systems to talk to each other. PLC's have communication ports that can be configured to talk all kinds of protocols. One of the most useful in home systems is the ASCII In/Out non-sequence protocol.

Each home system has their own unique command set of ASCII codes available for monitoring and operating their respective system. The PLC can read and write these codes and translate them to one common user interface, like a touch panel. The touch panel is typically setup as a graphic interface with buttons for each subsystem, thus giving the homeowner one overall control system to operate. The PLC acts on a supervisory level, communicating to all home systems via RS232 connections and passing info to and from touch panels located throughout the home.


Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

RETRO-M is designed to replace existing Home Intercom Systems and operate on existing 3 and 4 wire systems. BLUETOOTH you music by adding the BT-RECEIVER. No need to remove existing master wall housing, trim plates available to cover those large holes. The RETRO-M intercom unit has a built-in AM/FM radio. Plug in mp3 players such as iPod, iPhone, Zune or any other hand held player into the master and share your music with the entire family. Choose between two music sources; listen to the radio in one room and the mp3 in another room.