High quality, affordable AV distribution has just got even easier thanks to the added functionality of the new units.

Kat5 Mark2 - Affordable AV Distribution

Keith Doxey

Kat5 Mark2 - Affordable AV Distribution
Keith Doxey www.KAT5.tv
 Submiited by http://www.automatedhome.co.uk

High quality, affordable AV distribution has just got even easier thanks to the added functionality of the new units.

Keith Doxeys very successful KAT5 modules have been upgraded to a new "Mark2" version. High quality, affordable AV distribution has just got even easier thanks to the added functionality of the new units. Keith hopes to start shipping the KAT5 Mk2's in June 2005. Many people have already ordered the new units, and for the first time Keith has outsourced their production meaning long lead times will become a thing of the past. Read the KAT5 press release below for some of the exciting new features of the Mk2's...

Mk2 KAT5 Units - Building on the success of the original KAT5 modules we are pleased to announce the launch of the new feature rich Mark 2 units.

The "AVTX" (transmitter) and AVRX (receiver) units support Composite or S-Video with Stereo Audio as before, but the new units now bring the added functionality of IR Pass Through and SCART Control as standard!

  • IR Pass Through - This allows remotely located source equipment to be controlled from the viewing room. For example, if you use your Kat5 unit to pipe the output of your home cinema system downstairs to your bedroom upstairs, you can now control your DVD player etc all over a single Cat5 cable!
  • SCART Control - This replicates the SCART Switching signals from the source equipment at the viewing room. This gives the impression that a long SCART cable connects the two devices. If your source sends the signal to switch to widescreen mode, your TV/Projector at the remote location will receive that command too, all over the single Cat5 cable...
  • AVTX Switchable Termination - The transmitter now features switchable input termination allowing multiple KAT5 Transmitters to be connected to the same source equipment using simple Passive SCART splitters rather than needing expensive active splitters. This also allows a KAT5 Transmitter to be connected to a source at the same time as a TV.

  • AVRX Switchable Termination - The receiver now features switchable termination allowing more than one receiver to be fed from a single transmitter. For example you could send the output of a single FreeView box to many TVs in your home.
  • S-Video Mixdown - A new feature to the AVRX is S-Video Mixdown. This allows an S-Video source to be mixed down to composite video for TV's that do not support S-Video signals. For example, you may want to distribute a high quality S-Video Signal to all the TVs in your home. Perhaps the TV in the kitchen can only take a composite feed. No problem - all the other TVs get S-Video, and with a flick of a dip switch the receiver unit in the kitchen converts the S-Video to Composite!

KAT5-Mk2 Close-up

Also available are the AVTX-RGB and AVRX-RGB units, which are suitable for carrying high quality RGBS signals to Plasma Screens and Projectors (these units have no audio capability).

Versions of all units can be ordered with alternative connectors such as BNC, Phono and MiniDIN although these will not support the SCART switching functions.

(Mk2 units are compatible with Mk1 units but IR and SCART functionality will only be available if the Mk1 unit is upgraded with the optional IR Upgrade)

Note: A US distributor will be available once these units are in production

Comments (0)

This post does not have any comments. Be the first to leave a comment below.

Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Introducing the revolutionary Comelit Visto Smart Doorbell

Introducing the revolutionary Comelit Visto Smart Doorbell

The Visto Doorbell is a new Smart Doorbell from Comelit which combines a modern Italian design with all of the basic features you are looking for in a smart video doorbell. In fact, it is so smart that it can use the 2 wires from your existing doorbell and pass both the power and the data signals. This solves the common problem of having poor wifi coverage all the way at your front door. The Visto also has built in night vision, video recording on a SD card and in the cloud, motion detection, and multiple mounting options including an angle mount. The second thing we are introducing is the Visto Dealer referral program. Because we only sell through the Professional Distribution channel, we want to give our dealers who buy in that channel extra incentives to sell our product. For any security dealers or installers who go on our website www.vistodoorbell.com, and sign up for our program, we will offer the following: - Free referrals to customers in your area - Cashback program - 10% discount during the 1st month of the launch - Free Visto t-shirts and gear - A chance to win a trip for 2 to Venice, Italy Its that easy. Let us refer customer to you and get paid in the process. All while selling a wonderful Italian designed smart doorbell which is innovative and easy to install. So all dealers should protect the pro-channel and install products like the Visto which are made and sold only at your friendly local security and low voltage distributors.