I have to say that the AtlasIT has saved me a lot of time already! My second lot of Clipsal RJ45 sockets used a different colour code to the first lot meaning they didn't work when I installed them! A few minutes with the AtlasIT showed me that the orange and green pairs were swapped. On another occasion I was connecting my TiVo to the phone line using one of the CAT5 cables at the back of my AV system. I couldn't figure out what was wrong, but a couple of minutes with the Atlas and I realised I had patched the phone line in to the wrong port on the patch panel.

Atlas CAT5 Tester

Mark McCall | Automated Home - UK

Atlas CAT5 Tester
by Mark McCall, Automated Home - UK

I have to say that the AtlasIT has saved me a lot of time already! My second lot of Clipsal RJ45 sockets used a different colour code to the first lot meaning they didn't work when I installed them! A few minutes with the AtlasIT showed me that the orange and green pairs were swapped. On another occasion I was connecting my TiVo to the phone line using one of the CAT5 cables at the back of my AV system.  I couldn't figure out what was wrong, but a couple of minutes with the Atlas and I realised I had patched the phone line in to the wrong port on the patch panel.


My good mate Darren has the "Daddy" of all Cable Testers. It's a Fluke something-or-other and it's amazing! It can ping IPs, generate network traffic, test bandwidth , tell how long your CAT5 cable is, how many metres down the cable the break is (if there is one) and even the date and time the cable was manufactured (ok…I made that last one up). The only problem with this hand held wonder is that it's the same price as a small farm in Donegal!...

Atlas
With all the cable in our house I've always wanted a CAT5 tester. I don't need all the fancy stuff, just a simple tester that would give me straightforward information on my cables which are all already terminated into patch panels.

Enter the Atlas IT Network Cable Analyser from Peak Electronic Design Ltd. The small but perfectly formed Atlas is a CAT5 "network cable analyser".  It is supplied in a foam-filled custom hard plastic case along with 2 patch leads, 2 terminators and even a spare battery!  There's a small paper manual included in the box (around a dozen pages) and it gives details of the 14 day money back "Peak Satisfaction Guarantee" as well as the one year warranty.

Using The Atlas
The Atlas is pretty idiot proof. Take one of the little dongle terminators from the package and attach it to one end of the included CAT5 patch leads. The other end of the lead is plugged into the patch panel or RJ45 wall socket. The Atlas is plugged in at the other end. Hit the TEST button, simple as that. The Atlas automatically identifies the cable type it's connected to and verifies all the connections. With the 2 patch leads and 2 terminators included in the package it's possible to test cables which are plug to plug, plug to socket and socket to socket.

I have to say that the AtlasIT has saved me a lot of time already! My second lot of Clipsal RJ45 sockets used a different colour code to the first lot meaning they didn't work when I installed them! A few minutes with the AtlasIT showed me that the orange and green pairs were swapped. On another occasion I was connecting my TiVo to the phone line using one of the CAT5 cables at the back of my AV system.  I couldn't figure out what was wrong, but a couple of minutes with the Atlas and I realised I had patched the phone line in to the wrong port on the patch panel.


The Terminator can go at the patch panel or the socket end of the cable

 


Faults are clearly displayed and explained on screen.

 


Some Example Screen shots taken from Peaks website

 


Atlas can be at either end of the cable, just connect, hit the button and wait for the results

Features

  • Automatic identification of Straight-Through patch cables 

  • Automatic identification of Cross-Over cables 

  • Comprehensive analysis of above cable types 

  • Analyses all 8 lines of the cable 

  • Fault identification and highlighting for the following faults: Shorted Lines, Open lines, Swapped lines 

  • Display of cable-making instructions when not testing cables 

  • Can test plug-plug, plug-socket and socket-socket 

  • Support for up to 150m (500ft) of cable 

  • Miniature Atlas Terminator, ideal for use in tight spaces 

  • Clear and user-friendly scrollable display 

  • Spare battery and spare Atlas Terminator supplied 

Improvements
One thing that would be a nice addition to the package is something that would allow you to connect it to cables that have not been terminated already.  Something that you could push or clip the loose ends into to allow you to quickly connect a bare cable to the Atlas.

Conclusion
The old adage about having the right tools for the job is very true.  The Atlas has reduced cable fault finding to in our house almost to the level of fun! :)

Update

Peak have just announced a new "ID" feature for the Atlas!

"Cable-Run Identification for Atlas IT! - The Atlas IT Network Cable Analyser has now been programmed to automatically recognize the new ID Terminators. Using the new ID Terminators provides all the existing functions of cable type identification and fault detection in addition to cable-run identification. Now you can analyze and identify lots of cables without needing to make lots of trips to swap terminators. Sets of 8, 16 or 24 unique ID Terminators are available from Peak Electronic Design Limited. Availability: June 2002. Please note that ID Terminators are only suitable for the Atlas IT cable analyzer with firmware revision 2 or later. This extra functionality can be added to earlier analyzers upon request."

Approximate Price £99.00

Available From Peak Electronics or in the US from Anatek Corp


Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Octava -4K UHD Video Over LAN Matrix Switch. Video Wall Processor

Octava -4K UHD Video Over LAN Matrix Switch. Video Wall Processor

The Octava PRO DSX is a simple to use, powerful video distribution solution designed to deliver HD video including 4k UHD from multiple sources to multiple displays. The PRO DSX also functions as a Video Wall processor to create n x m video walls. The PRO DSX delivers HD video over standard CATx LAN cables allowing for simple integration in virtually any infrastructure. The PRO DSX was specifically designed for ease of use for residential installations and engineered for scalability to accommodate large video distribution systems such as education, corporate , and hospitality applications. Easy to configure and customize for your video system - Build virtually any size video matrix switch system. The Pro DSX is a scalable platform enabling easy system growth. Simply add PRO DSX TX for each video sources required and a PRO DSX-RX per display. Video Wall Support- The PRO DSX features a built-in video wall processor that enables you to create custom video walls.