X-ray vision remote software can be downloaded from www.x10.com and used to view your camera images from anywhere via an internet connection. Just enter your home computer’s IP address, type in your password and you are able to see the images from the remote camera ( updated every 10 seconds to 2 minutes).

X-Ray Vision Internet Kit

Rob Williams

X-Ray Vision Internet Kit
by Rob Williams

X-ray vision remote software can be downloaded from www.x10.com and used to view your camera images from anywhere via an internet connection. Just enter your home computer's IP address, type in your password and you are able to see the images from the remote camera ( updated every 10 seconds to 2 minutes). 


One of  X10's latest products is their X-ray vision Internet kit. The first item in the kit is a very small colour camera (Xcam2) with a built in radio frequency transmitter. This device is amazingly tiny. You can run it completely wireless by using the battery pack (optional) that provides for up to 4 hours of use or you can use the small ac adapter that is addressable via X-10 signals. 

This camera sends its video signals to the X10 A/V receiver, which converts it to either, a composite signal (channel 3 or 4 on a TV) or video out via a RCA connector (which can be connected to your computer via the USB Video Capture Adapter).

The X-ray vision software (downloadable from www.x10.com ) runs on Win95, 98, ME and Win2000. It allows you to set-up a range of options such as sending pictures by e-mail or to a database. The database option allows you to set the system to dial up and send photos to a web server every few seconds thus letting you view the action from a remote location. The upload can also be activated from an event such as motion detection or at a specific time.

If you have multiple cameras, the active one is selected by turning off and on the power supply (via x10 signals if desired) as there is only one receiver. The camera and receiver also have four separate channels so you can have more than one receiver and more than 16 cameras under control.

X-ray vision remote software can be downloaded from www.x10.com and used to view your camera images from anywhere via an internet connection. Just enter your home computer's IP address, type in your password and you are able to see the images from the remote camera ( updated every 10 seconds to 2 minutes). 

You can also use this camera without this software as a remote web camera or capture the video to a file. This camera set-up can be used as part of a security system or whatever other reasons you can think of ... such as spying on the kids in the backyard. 

All of this functionality is amazing considering the kit sells for only $129.00.  Components included:

  • VK58A Indoor/Outdoor colour camera kit
  • XC16A camera transmitter      
  • VR31A 2.4 Ghz receiver
  • XM10A addressable power supply
  • VA11A USB Video Capture Adapter

You can later add more cameras and connect the reciever to the RCA  input on your TV to watch things live around your house. Use a remote and integrate it  into your X-10 setup.

Thanks to the new technologies of the camera sensor and all circuitry being included on one chip the price of colour cameras has come down a lot in the last few years. There is a wide range of wireless camera kits at http://www.x10.com ... from a basic camera kit to mutli-camera setups.


Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

RETRO-M is designed to replace existing Home Intercom Systems and operate on existing 3 and 4 wire systems. BLUETOOTH you music by adding the BT-RECEIVER. No need to remove existing master wall housing, trim plates available to cover those large holes. The RETRO-M intercom unit has a built-in AM/FM radio. Plug in mp3 players such as iPod, iPhone, Zune or any other hand held player into the master and share your music with the entire family. Choose between two music sources; listen to the radio in one room and the mp3 in another room.