Installation was a snap. Run the install software ... plug in the device when asked ... test and see that it worked ... which in my case it did. The remote itself is very small (fits into a shirt pocket) and it's buttons are pretty straight forward.

Keyspan Digital Media Remote

| Keyspan

Keyspan Digital Media Remote
www.keyspan.com

Installation was a snap. Run the install software ... plug in the device when asked ... test and see that it worked ... which in my case it did. The remote itself is very small (fits into a shirt pocket) and it's buttons are pretty straight forward.


USB devices rule. I can't tell you how many times my system has been trashed or I've spent hours trying to configure a new device or pc card to review. The last 2 devices have been USB and both have installed seemlessly (at last). The other one was an ethernet connection for my laptop ... easy as pie.

The Keyspan Digital Media Remote is a handy little device if you're into doing presentations and or want to play multimedia content remotely. It's a tiny little remote control with a USB IR receiver that plugs into your PC. The buttons are mapped to various multimedia software programs as well as Power Point™. In addition you can map them to pretty much whatever you want. It controls your multimedia applications by sending the same keyboard keystrokes via the Keyspan DMR Remote Control. For example, if your program uses the "N" key to advance to a new slide, the Keyspan DMR Remote Control can send the same key to your application allowing you to control your application from across the room.

As I said above ... installation was a snap. Run the install software ... plug in the device when asked ... test and see that it worked ... which in my case it did.

The remote itself is very small (fits into a shirt pocket) and it's buttons are pretty straight forward. The picture at the right is pretty much full size.

Besides the required drivers, the Keyspan Digital Media Remote installer installs an application called the Keyspan DMR Assistant. This application is used to:

  • Determine the status of the Keyspan Digital Media Remote software and hardware
  • Start and Stop the DMR Daemon
  • View, Customize, and Create your Keyspan DMR Settings
  • Assist in problem solving

Out of the box, the system is set up to control the following applications. The * button cycles through the applications that are running on your PC so that you can have more than one going at a time ... play a CD while giving a powerpoint presentation for example.

Microsoft Power Point Viewer, Microsoft Power Point, XingDVD, WinTV32 Radio, WinTV32, Cyberlink, PowerDVD, CineMaster, Creative Labs PC-DVD Encore, WinAMP MP3 player, Sonique MP3 player, Real, Audio jukebox, Real Audio player, Realmagic Hollywood DVD, Quicktime Player 4.x, Microsoft CD, Player, Mediamatics DVDExpress, Microsoft Media Player, Quicktime Player 3.x

If your application is not on the list then you can use the software to map keystrokes to the remote. This is done via a straight forward ... fill in the blank process. Basically you just pick the remote button to map and then stroke the key you want it to emulate.

Overall this is a nifty little package ... especially handy for presentations but equally valuable for multimedia control. Easy to install and operate and at $79 it's not overpriced.


Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.